Watercolor Effect

Disclaimer:

None of the given Photoshop Tutorials are written by me. They are all taken from various sources on the Internet and I compiled some of them for you. Hope you understand. More are in the line.

Step 1

Open an image, I will use this image because it suit to my tricks.

Step 2

CTRL + J, duplicate the image. Now you will have a layer which labeled as “layer 1�. SHIFT + CTRL + U, desaturate the image and you will get something like this:

Step 3

CTRL + J again to duplicate layer 1 and you will get a new layer which labeled as “layer 1 copy�. CTRL + I to invert the layer and set the layer blend mode to Color Dodge. Go to filter > other > minimum > 1. Double click on layer 1 copy to bring out the blending option. ALT + left click on the triangle and set the underlying layer as below:

Step 4

CTRL + E to merge up both layers. CTRL + J, duplicate layer 1. Select layer 1 copy and go to filter > blur > Gaussian Blur > radius 6. Set the layer blend mode to linear burn. CTRL + J on layer background and put the layer background copy at the top of all layer and set the layer blend mode to color.

Step 5

Hope you are still with me. Select layer background copy and add a layer mask, fill it with black color.

Step 6

Still with the layer background copy, go to image > adjustment > curve and set as below.

Step 7

Create a new layer and put it top of all layer. Fill it with #ffecd1. Set layer blend option to linear burn.

Step 8

We are nearly there, now select layer 1 and set the opacity to 60% or whatever you think suitable. Select the background copy layer’s mask, with a 45px soft brush, opacity 65%, brush the face area. Here is it!

The difference:

Examples:

Hope you guys enjoy this! Thanks!

Fantasy Art Photopshop Tutorial – Plasma in the Lake

Disclaimer:

None of the given Photoshop Tutorials are written by me. They are all taken from various sources on the Internet and I compiled some of them for you. Hope you understand. More are in the line.

The requests for Fantasy Art tutorials are enormous, I still get emails and Pms from people asking to do more Fantasy Art tuts, so here is one more, called “Plasma” (Star, not the TV!) which I hope you’d enjoy.

1. Make a new canvas, we used 600*480 px here, but the size is of course optional.

2. Select the Gradient Tool, using two shades of blue (see below), fill your canvas, so that the darker colour will be on top.

3. Take a photo of a girl. Traditionally I am using Becca’s photo from her Deviant Art account, but you can replace her with any semi-sitting figure of your choice. Crop the figure and paste her unto your canvas. In needed, resize her so that she will fit in.

4. To get rid of the visible crappy cropping, and to give the girl more emphasis, add blueish glow to her by going to Layer >> Layer Styles >> Outer Glow and applying the following settings:

This is what you would get:

5. Make a new Layer. Make sure your primarily and secondary colours are black and white. Go to Filter >> Render >> Clouds

And, if needed apply the clouds effect a several times to achieve the desired randomly “clouded” effect.

6. Reduce the opacity of the layer to semi-visible.

7. Press Ctrl+T for free transform, and then right mouse click and “Scew”. Drag the left corner of the clouds layer, as shown on the illustration below:

Press “Enter” when you are done, then Ctrl + D to deselect the layer.

8. Duplicate the clouds layer. Select the upper layer and go to Edit >> Transform >> Flip Horizontal.

9. Select the girl’s layer from layers panel and drag it to the top, so that it would be your utmost upper layer.

Remember to remove the parts where layers turn to be on top of one another.

10. Take a photo of a lake with water circles. We used this one from Digital Free Photo, but again – this is optional.

Paste the layer unto your composition, so that the circles in the water will be “around” the girls or your main figure.

11. Using the Eraser Tool, remove the lower part of the girl’s layer, so create the illusion as if she is really sitting inside the water and the water circles are “from” her.

12. Set lake’s layer blending options to Luminosity.

13. Drag the Layers of the clouds on top of the water later and using eraser tool with soft edge (100px) remove the sharp parts, so that only the “steaming” clouds will remain, no edges.

14. Now to the hard bit – creating the plasma cycles.
Make a new layer (this is important) and place it on top of all the others.

15 Using the Elliptical Marquee tool, draw and ellipse. While the ellipse on the new layer is selected, Right-mouse-click and choose “stroke”. Apply the settlings below for the stroke effect:

16. Press Ctrl + T to free transform, and then right-mouse-click >> Prospective. Try to distort the round layer you have to it would look like the line is surrounding or flowing around the girl.

17. Using the Eraser tool with big soft edge, remove the “farther” part of the round, behind her head, like this:

18. While this layer is selected, go to Layer >> Layer styles >> Outter glow and apply the following glow settlings:

19. Duplicate the layer a several times and each time transform the round using the prospective settlings, so that the circles chaotically surround the main figure’s body.

20. Remember to leave the “front” part of the circle visible and erase the “back” part of it. This is more or less what you should have by now:

21. Flatten the Layer.
22. Go to Image >> Adjustments >> Levels and apply the following settlings to give the image an overall bluish hue:

23. Duplicate the layer.
24. While the upper layer is selected (and your background colour in the palette is set to white), go to Filter >> Distort >> Diffuse Glow and apply these glow settings.

25. Reduce the opacity of the “glowing layer” to 20% (or less, depends on your image).
26. Flatten the layer again to merge both layers into one.

27. Using some star brushes (download free on deviant Art resources page), apply the stars chaotically around and allover the glowing cycles.

28. Select the background layer (the artwork, not the stars) and to to Renters >> Lightening effect, apply the following spot light effect twice.

29. Get back to Stars layer, and go to Layer >> Layer Styles >> Outer Glow, and add the following glow using white #ffffff colour.

30. Duplicate the stars layer.
31. Go to Filter >> Blur >> Radial Blur and apply these settings.

You may choose to reduce the opacity of this layer if you feel the rounded blurred effect is too strong. That’s it, your artwork is ready:

Add Dynamic Lighting to a Flat Photograph

Author: Giackop

In this tutorial, he will show you how to spice up a fairly dull and flat photograph. It's very easy and fast! Go from flat photo to a uniquely lit style.

Source Photos

For this tutorial, we'll need two photos that I took. You can download them to follow along. These are my photos: castle photo and clouds photo.

What We're Making

Here's the composite we're making. Click to see a larger version:

Step 1

First of all, my apologies for this step. I waited for a good 20 minutes but that car didn't move, so I had to take the photo with it!

Anyway, just use the Patch Tool (J) to remove the car and the Clone Stamp Tool (S) to recreate the pattern of the bricks where it used to be.

If you've never used the Patch Tool, there are a couple of ways to use it. First, make a selection as you would if you were using the Lasso Tool, then click inside the area and drag with your mouse. Depending on whether you are using Source or Destination as your checked option you will either move the image inside the selection, or move the whole selection around. The Patch Tool will blend-in the area you've chosen when you let go. You can also use patterns and transparency. All in all, it's a great tool.

Step 2

Once the van has been removed, apply Filter > Render > Lighting Effects to make the light come from the top right.

Step 3

With the tool that you prefer, create a selection of the part that you want to hide. For example, I used the Pen Tool (P) to select the sky and the buildings around the castle. With the selection active, add a Layer Mask.

Step 4

Duplicate the background layer, desaturate it with Ctrl+Shift+U, apply Filter > Blur > Gaussian Blur with 4-pixel Radius, and set the Blending Mode for the layer to Overlay.

Step 5

Now we need a photo with clouds and the rays of the sun coming from the right. I used this photo of mine that was perfect for this situation.

Send it to the back of the other layers.

Then duplicate it and set the copy layer Blending Mode to Lighter Color.

Step 6

Duplicate again the original background photo (Layer 1) and put the this new layer below the Layer 1 copy.

Set the Blending Mode to Multiply.

Step 7

Now turn off the visibility of the two castle layers, go to the Layer 1 copy, and merge the visible layers into a new layer with Ctrl+Shift+Alt+E.

Then desaturate it with Ctrl+Shift+U, set the Blending Mode to Overlay, and the Opacity to 50%.

Step 8

Make a new layer on the top of the other.

With a large, white, soft brush that matches the size of the light of the sun, just make a round spot.

Then apply the Luce filter that you can download free or use the previous tutorial about Lighting Through Clouds here on PSDTUTS, to make this light coming through the clouds. Set the Blending Mode to Overlay.

This is an example with black background to demonstrate the effect.

Step 9

Just Burn the dark side of the castle and Dodge the light part of it with a large, soft brush. By doing this, we make it seem as if the light is coming from the clouds and hitting the right side of the castle, leaving the other side in darkness.

At this point we're almost done, but the image is overall quite dark and our blur earlier has left it slightly too blurry, so we'll fix that next.

Step 10

To finish the image, create a new layer above the rest and go to Image > Apply Image, use the settings "Merged", "RGB" and "Normal" for blending. This will create a new layer above the rest holding a copy of the image. Set this layer to Screen and about 70% Opacity. Then go through each layer and apply Filter > Sharpen > Unsharp Mask and use the settings Amount: 250% and Radius .2px (Use a larger radius for larger images). This should sharpen the image back up to give us a good final result.

Click on the image below to see a larger version: